PurePro® Economy RO Systems
|
|
Advanced technologies
This revolutionary new 6 stage system uses Reverse Osmosis,
Deionization and Carbon Filtration to put refreshing, clean
water at your fingertips. No other system available anywhere can
give you all three kinds of purification in a system that is so
simple.
Using reverse osmosis technologies with deionization can
actually remove 99.99% of contaminants found in water and
provide people with perfect drinking water. Only this
combination of technologies can ensure absolute purity and
produce highest quality pure water.
Deionization (DI) filters
Deionization (DI) filter takes the full size RO to a higher
level of filtration. It is an excellent filter, especially those
who live in areas with exceptionally high levels of TOTAL
DISSOLVED SOLIDS (TDS) in their tap water. The post deionizer
takes the small percentage of contaminants that the membrane
could not remove and filters this to greater than 99.99% pure.
It will give you 0 ppm TDS, Conductivity attainable less than
0.1uS/cm or resistivity of close to 18 meg.ohm
For more information about deionization (DI) filter, please
click here.
Features:
3.2 Gallons NSF Standards Water Storage Tank.
FDA Approved Polypropylene Made Flat Cap Housing (double o'ring).
Automatic Shut-off Valve, Mini Flow Restrictor, Stainless Steel
Check Valve.
Long Reach Chrome Faucet (upgrade faucet is acceptable)
Feed water connector.
Drain Saddle Valve.
Four Color Coded 1/4 inch Tubing for System Connection
Completely Assembled
100% Factory Tested and Sterilized Ready for Installation.
Installation Instruction.
CARTRIDGE FILTERS
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in removing dirt,
rust and sand particles.
(Stage 2) Carbon Block Filter:
It takes out 99% of the chlorine and organic chemicals. It
provides enhanced reduction of taste, odor, and color.
(Stage 3) 1 Micron Sediment Filter :
With only 1 micron rating, provides effective filtration to
protect your membrane. It provides for improved membrane
performance up to 95% of TDS rejection.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane that processes
50 gallons per day. It remove the following hard water
contaminants that may be present in your water: lead, cooper,
barium, chromium, mercury, sodium, cadmium, fluoride, nitrite,
nitrate, and selenium.
(Stage 5) Post Carbon filter:
This carbon post filter removes objectionable tastes and odors
to enhance the quality of your drinking water. We are using NSF
approved post carbon to guarantee the taste of water.
(Stage 6) Deionization (DI) Filter:
Produce 99.99% pure water by simply attaching this convenient
deionization filter with RO unit. Convenient post RO filtration
DI unit (RO/DI unit) provides crucial supplemental filtration to
remove most impurities for pure polished product water.
Excellent in areas with hard water. Produce 99.99% pure water.
It will give you 0 ppm TDS, Conductivity attainable less than
0.1uS/cm or resistivity of close to 18 meg.ohm
Specifications:
Membrane: 50 GPD / 189 LPD
Operation pressure: 50 -100 psi
Dimensions: (cm) 37 (L) x 45(H) x 20 (W) - system
(cm) 28 (L) x 28(W) x 35 (H)- tank
Weight: 8 kg - system
4 kg - tank
PurePro® Economy RO Systems